邯郸市电动门厂

Electric telescopic door, according to "electric", is divided into ordinary type (with power control box, power part in control box), electromechanical integration type (power part and logic circuit on electric body). This kind of Denso high cost performance, good reliability, intelligent integration type) (only in mechatronics with liquid crystal display, electronic travel, electronic torque, remote debugging function), intelligent integration of electricity is ontology update, development of intelligent integration is the integration of intelligent bus type, and power components update frequency converter the use and frequency conversion type.

电动伸缩门主要由门体、驱动器、控制系统构成。伸缩门的门体采用优质铝合金及普通方管管材制作，采用平行三边形原理铰接，伸缩灵活行程大。电动伸缩门的驱动器采用特种电机驱动，蜗杆蜗轮减速，并没有手动离合器，停电时可手动启闭，伸缩门的控制系统有控制板，按钮开关，另可根据用户需求配备无线遥控装置。

The electric telescopic door is mainly composed of the door body, the driver and the control system. Flexible door door of high quality Aluminum Alloy and ordinary square tube pipe production, using parallel triangle principle articulated telescopic flexible itinerary. The driver of the electric telescopic door is driven by a special motor. The worm and worm gear decelerate, and there is no manual clutch. When the power fails, it can be manually opened and closed. The control system of the telescopic door has control panel, button switch, and another can be equipped with wireless remote control device according to the needs of users.

关于“延长寿命及保养方法”项目

On "extended life and maintenance methods"

关于“延长寿命”项目

On the "extended life" project

电动伸缩门的基本组件是导轨、滑轮及传动皮带。由于这三个部分与电动伸缩门的运行直接有关，是电动伸缩门正常使用条件下的易损件，其结构设计、材质、加工精度、安装和调节精度决定了其维修保养要求和使用寿命。电动伸缩门电气组件的寿命主要与不当使用和偶然事故有关。

The basic components of the electric expansion door are the guideway, the pulley and the transmission belt. Because these three parts are directly related to the operation of the electric telescopic door, they are the vulnerable parts of the electric telescopic door under normal service conditions. Its structural design, material quality, machining accuracy, installation and adjustment accuracy determine its maintenance requirements and service life. The life of electrical components of the electric expansion door is mainly related to improper use and accidental accident.

长期以来，电动伸缩门滑轨的设计完全不同于非电动伸缩门滑轨的设计。后者通常有两道水平方向的平行滑轨，两个(或四个)滑轮通过中间的连接件与悬挂的移动门体相连，移动门体的重心恰好在两道滑轨的支撑力之间，形成稳定的"正悬挂"，这种稳定的结构可以达到很好的稳定性和静音效果。但是，电动伸缩门的滑轨由于要兼顾与门框的固定、门体吊挂及调节、电气组件的安装和外饰盖板的安装等功能，所以最简单的办法就是将滑轨设计成单侧滑道，门体在一侧通过滑轮侧向吊挂在滑轨上，形成侧悬挂。这种设计的优点是安装和调节门体方便、维修也容易。但是，这种设计有许多弱点。

For a long time, the design of the sliding rail of the electric telescopic door is completely different from the design of the non electric expansion gate slide. The latter usually has two horizontal parallel slide, two (or four) pulley through the middle of the connecting piece and the suspension moves the door body, the door body is between the movement of the center of gravity in the two rail supporting force, forming a stable "hangs", www.baishanbanjia.cn www.shensuomen.net.cn www.tuoshuiji.net.cn www.chutieji.com.cnwww.hupozhuanmuju.cnwww.suliaomuju.org.cnthis stable structure can achieve stability and the mute effect is very good. However, the electric telescopic door slide due to both the fixed and the door body and the door frame hanging and adjusting, electrical components are mounted and the exterior cover installation and other functions, so the simplest way is to slide into unilateral slide, door body in side by side hanging pulley on the sliding rail, forming lateral suspension. The advantage of this design is that it is easy to install and adjust the door, and it is easy to repair. However, there are many weaknesses in this design.

所以使用这种电动伸缩门必须注意保养和维护滑轮与导轨上部间隙容易使门体滑落，使用的安全性得不到保证。所以选择这种电动伸缩门必须注意电动伸缩门的抗风压强度。这种不稳定的运行使驱动器负载不断变化，对电气组件的使用寿命影响极大。侧悬挂结构，对门体向上的支撑力都在一条线上，门体重心由于安装精度的误差和风力的影响．使门体不仅形成静态侧摆也产生动态侧摆。为此．这种电动伸缩门门体下部的导向块，通常称为"止摆块"，就使用一种轴承，轴承直径小于门体下部导槽，使门体在两方向摆动的条件下依然可以运行。这种侧摆产生的震动在使用效果上表现为噪音，其后果必然导致滑轮和导轨的磨损。

Therefore, the use of this electric expansion door must pay attention to maintenance and maintenance of the upper clearance between the pulley and the guide rail easy to slide, the safety of the use is not guaranteed. Therefore, the choice of the electric expansion door must pay attention to the anti wind strength of the electric expansion door. This unstable operation makes the drive load constantly changing and has a great impact on the service life of electrical components. The side suspension structure has a supporting force on the door body upward, and the center of gravity of the door body is affected by the error of installation accuracy and the influence of wind force. It makes the door body not only form static pendulum but also generate dynamic side swing. For this reason, the guide block at the lower part of the door of the electric telescopic door is usually called the "stop swing block", and a bearing is used. The bearing diameter is smaller than the lower guide slot of the door body, so that the door body can still operate in the two directions of swing. The vibration produced by this side pendulum is expressed as noise, and the consequences will inevitably lead to the wear of the pulleys and guideways.

[L}]5FNSF12{3R5MMY1LM_4T.jpg]

[L}]5FNSF12{3R5MMY1LM_4T.jpg]

关于“保养方法”项目

On the "maintenance method" project

使用方法正确

Use the method correctly

在使用中，动作要尽可能的轻开轻关，不要用力过大过猛；电动伸缩门的开启时，发现有阻碍，应先排除故障。内开内倾窗、折叠电动伸缩门等高档电动伸缩门要严格按说明操作。

In use, the action should be as light as possible. Do not force too much. When the electric expansion door is opened, it is found to be obstructing, and the fault should be eliminated first. In the open window, introverted folding electric telescopic door and other high-grade electric retractable door should be in strict accordance with the instructions.

经常清洗

Regular cleaning

经常清洗，保持表面的清洁，在擦洗时尽量选择软质的纱布或棉丝等，以免划坏电动伸缩门的表面。在有污渍和脏物时，可用清水、酒精或中性洗涤剂、进行清洗

Often clean, keep the surface clean, and try to choose soft gauze or cotton yarn in scrubbing, so as to avoid the surface of the electrotelescopic door. In the presence of stains and dirt, clean water, alcohol or neutral detergent can be used for cleaning.

防腐蚀

Anticorrosion

尽量避免酸性、碱性化学物品接触铝合金电动伸缩门表面。

Try to avoid contact with the surface of aluminum alloy electroexpansion gate by acid and alkaline chemicals.

五金保养

Hardware maintenance

经常检查电动伸缩门的各类五金配件，如发现有损坏现象时及时进行修理或更换，五金件用久了，可涂少许的火蜡油或者滴些机油，减少摩擦力，保持电动伸缩门的开启关闭轻松灵活。电动伸缩门的密封毛条和玻璃胶条是密封保温的关键两个部件，如有老化松脱的情况，应该及时更换。

Check all kinds of hardware fittings of electric telescopic door regularly. If damaged phenomenon is found, repair or replace it in time. If the hardware is used for a long time, you can apply a little wax oil or dripping some oil to reduce friction and keep the opening and closing of the electric expansion door easy and flexible. The sealing strips and glass strips of the electrotelescopic door are the two key parts for sealing and insulation, and should be replaced in time if there is a condition of aging and loosening.