邯郸市电动门厂

自动门的技术要点

Technical points of automatic doors

如今很多建筑物的为了方便行人进出、增加豪华感，都会安装上自动门。自动门凭借其优异的性能及良好的厂家技术支持，迅速占领了广大的市场，成为中国自动门行业的一支新兴力量。自动门已经在商场、宾馆、饭店、机场、银行等场合得到了广泛的应用。接下来我们一起来了解一下自动门的技术要点。

Nowadays, many buildings are equipped with automatic doors to facilitate pedestrians to enter and increase their sense of luxury. With its excellent performance and good manufacturer technical support, automatic doors quickly occupied the vast market and become a new force in China's automatic door industry. Automatic doors have been widely used in shopping malls, hotels, hotels, airports, banks and other occasions. Next, let's learn about the technical points of the automatic door.

自动平移门安装和调试的关键是提高精度，即导轨的平直度和水平度。门体的两个吊挂点所形成的直线与导轨的平行度和垂直度，最大限度地减少门体的静态侧摆。在自动门投入使用后，尤其是初期，经常调节门体，修正运行产生的误差。要严格限制门体重量，不能超过自动门的额定负重。通常在三个月最多一年内要对自动门进行全面的清理和调整。

The key to the installation and debugging of the automatic translation door is to improve the accuracy, that is, the straightness and flatness of the guide rail. The parallelism and perpendicularity of the straight line and the guide rail formed by the two hanging points of the door body can minimize the static side swing of the door body. After the automatic door is put into use, especially in the initial stage, it often regulates the door body and corrections the errors caused by the operation. We must strictly limit the weight of door body and not exceed the rated load of automatic door. The automatic door is usually cleaned and adjusted in a maximum of three months.

公共场所的自动平移门因为使用频率非常频繁，而任何自动门的使用频率和使用寿命都有限。机场、大型超市和医院外门的人员流量每天可达成千上万人次，有些建筑物在特定时间段里集中通过大量人员。在这种情况下，要使用自动门就必须进行综合考虑。例如增加门的数量，加大门扇宽度，增加关门延迟时间等。

Automatic translation doors in public places are frequently used, and the frequency and life of any automatic door are limited. Airports, supermarkets and hospitals have tens of thousands of people a day outside their doors, and some buildings pass through large numbers of people at specific times. In this case, the use of automatic doors must be considered comprehensively. For example, increase the number of doors, increase the width of door fans, increase the delay time of closing doors, etc.