邯郸市电动门厂

电动伸缩门，按“电动”分为普通型（需配功率控制箱，功率部分在控制箱里），机电一体化型（功率部分，及逻辑电路在电装本体上。此类电装性价比高，可靠性好）,智能一体化型（只是在机电一体化上加了液晶显示，电子行程，电子力矩，遥控调试等功能）,智能一体化只是对电装本体的更新，智能一体化的发展是总线型的智能一体化，及功率部件的更新，变频器的使用，及变频型。 电动伸缩门广泛适用于各类工矿厂房、车间、仓库、机房、车库等场合作为活动围墙，大大扩大了电动伸缩门的应用范围。

Electric expansion door, according to "electric" divided into ordinary type (with power control box, power part in the control box), Mechatronics (power part, and logic circuit in the electrical assembly. This kind of electrical equipment has high performance price ratio, good reliability, intelligent integration type (only with the functions of LCD display, electronic stroke, electronic torque, remote control debugging, etc.). Intelligent integration is only the update of the electrical assembly, intelligent integration development is the intelligent integration of the bus type, and the update of the power components. The use of frequency converter and frequency conversion type. The electric expansion door is widely used in all kinds of workshops, workshops, warehouses, machine rooms, garage and other fields. It has greatly expanded the application scope of the electric expansion door.

☆

*

电动伸缩门尺寸

Size of electric expansion door

☆

*

电动伸缩门尺寸标准结构如下：

The size standard structure of the electric expansion door is as follows:

门排内空(即前后相临两大弯主管之间的距离，不含主管尺寸)采用伸缩门标准尺寸320mm(参照国外技术)，保证交叉管最固并大大减少运行噪音。

The inner space of the gate (i.e., the distance between the front and rear sides of the two large bending heads, without the size of the head) adopts the standard size 320mm of the telescopic door (referring to foreign technology) to ensure that the cross pipe is the most solid and greatly reduces the operation noise.

最窄长度，合起：2米，伸开：4米。

The narrowest length, close up: 2 meters, open: 4 meters.

最宽长度，合起：12米，伸开：26-30米。

The longest width is 12 meters, and the extension is 26-30 meters.

最高，一般为1.5米，最低为55cm。

The highest, generally 1.5 meters, the lowest 55cm.

☆

*

电动伸缩门配件有哪些？

What are the parts of the electric expansion door?

☆

*

电动伸缩门常用到的配件主要有：电动伸缩门专用遥控器、外用发射控制器、限位磁铁、专用线缆、防撞防爬器等。电动伸缩门主要包括两大项：驱动装置和门体。电动伸缩门驱动装置含：一体减速电动伸缩门电机、离合器、干簧管、限位开关、系统控制主板、红外感应探测器、密封式齿轮电机、控制盒、机箱、LED显示屏等。电动伸缩门的门体主要包括：主材门排、中间交叉杆、轮子、启动轮、防风设计钩等。

The main parts of the electric telescopic door are mainly: the special remote control of the electric expansion door, the external launch controller, the limit magnet, the special cable, the anti-collision and anti creeper. The electric expansion door mainly consists of two main parts: the driving device and the door body. The electric telescopic door driving device includes: the motor, clutch, dry reed tube, limit switch, system control main board, infrared induction detector, sealed gear motor, control box, chassis, LED display, etc. Electric telescopic door body mainly includes: wood door row, intermediate cross rod, wheels, wheel, windproof hook design start.

电动伸缩门主要有伸缩门体、机头、控制器三部分组成。

The electric expansion door mainly consists of three parts: telescopic door body, nose and controller.

1.伸缩门体

1. telescopic door body

伸缩门体是由门体大框、交叉撑、轴(定轴、滑轴)及门体轮等主要部件组成。门体整体为金属结构，按材质又分为不锈钢门体、铝合金门体、压铸铝门体。

A telescopic door body is composed of a door body frame, cross bracing, axis (axis, sliding axis) and the chakras and other main components. The door body is a metal structure, and is divided into stainless steel door body, aluminum alloy door body and die-casting aluminum door material according to the material.

2.机头

2. head

机头由驱动器和电气部分组成，它固定在门体的一端，带动门体伸缩运动，与门体配套使用。驱动器分普通型和机器人型。

The machine head is composed of a driver and an electrical part. It is fixed at one end of the door body to drive the door body to expand and move, and is matched with the door body. The drive is divided into common type and robot type.

3.控制器

3. controller

控制器由控制盒、台式控制器及手柄遥控器组成。

The controller is composed of a control box, a desktop controller and a handle remote controller.

3.1 控制盒

3.1 control box

控制盒固定在机头内，由它接收控制器发出的指令控制门体的运行。

The control box is fixed in the machine head, and it receives the instructions issued by the controller to control the operation of the door body.

3.2 台式控制器

3.2 desktop controller

台式控制器主要由值班人员在值班室内使用。

The desktop controller is mainly used by duty attendants in duty rooms.

3.3 手柄遥控器

3.3 handle remote control

手柄遥控器主要配备车辆使用，可在机头周围10-30米内(根据现场的无线电通讯环境而定)活动控制大门的开、关。

The handle remote controller is mainly equipped with vehicles. It can control the opening and closing of doors within 10-30 meters around the head (according to the radio communication environment).