有关电动车库门的安装，可能很多的人都不会，而且也不会对它进行更优越的保护，如果你们知道它的安装程序，那么你也就会更好的来保养它。车库门在生活中使用非常广泛，大部分都是自动车库门,或者遥控车库门。
About the installation of electric garage door, many people may not, and will not provide better protection for it. If you know its installation procedure, then you will better maintain it. Garage door is widely used in life, most of them are automatic garage door or remote control garage door.
一、轨道的安装
1、 Installation of track
根据门板的宽度和高度确定两轨道固定性的位置并用水平管测水平，再用M8×41㎜的方头螺钉固定。用卷尺测准水平轨与墙壁及两水平轨之间保定平面设计培训 保定室内设计培训 保定空调移机 保定太阳能维修 保定厨房排烟 雄安管道通风 的间距，用水平尺测准水平轨的水平，然后用M6.4×14㎜的小帽螺丝和六角螺帽将水平轨连接件与水平轨和轨道固定性连接固定。用带眼角钢制成两个三角架，然后将其与水平轨的末端用M6.4×14㎜的小帽螺丝、螺帽连接，并用M8×70㎜的膨胀螺栓固定到天棚或墙壁上。
According to the width and height of the door panel, determine the fixed position of the two tracks, and measure the level with the horizontal pipe, and then fix it with the square head screw of M8 × 41mm. Measure the distance between the horizontal rail and the wall and between the two horizontal rails with a tape measure, and measure the level of the horizontal rail with a level ruler, and then fix the connector of the horizontal rail with the horizontal rail and the track with the small cap screw and hexagon nut of M6.4 × 14 mm. Two tripods are made of angle steel with eyes, and then they are connected with the end of horizontal rail with M6.4 × 14mm small cap screws and nuts, and fixed to the ceiling or wall with M8 × 70mm expansion bolts.