☆

☆

电动伸缩门常用到的配件主要有：电动伸缩门专用遥控器、外用发射控制器、限位磁铁、专用线缆、防撞防爬器等。电动伸缩门主要包括两大项：驱动装置和门体。电动伸缩门驱动装置含：一体减速电动伸缩门电机、离合器、干簧管、限位开关、系统控制主板、红外感应探测器、密封式齿轮电机、控制盒、机箱、LED显示屏等。电动伸缩门的门体主要包括：主材门排、中间交叉杆、轮子、启动轮、防风设计钩等。

The main parts of the electric telescopic door are mainly: the special remote control of the electric expansion door, the external launch controller, the limit magnet, the special cable, the anti-collision and anti creeper. The electric telescopic door mainly consists of two main parts: the driving device and the door body. The electric telescopic door driving device includes: the motor, clutch, dry reed tube, limit switch, system control main board, infrared induction detector, sealed gear motor, control box, chassis, LED display, etc. The door of the electric telescopic door mainly includes: main material door row, middle crossing rod, wheel, starting wheel, windproof design hook and so on.

电动伸缩门主要有伸缩门体、机头、控制器三部分组成。

The electric expansion door mainly consists of three parts: telescopic door body, nose and controller.

1.伸缩门体

1. telescopic door body

伸缩门体是由门体大框、交叉撑、轴(定轴、滑轴)及门体轮等主要部件组成。门体整体为金属结构，按材质又分为不锈钢门体、铝合金门体、压铸铝门体。

The telescopic door body is composed of main frame, cross bracing, shaft (fixed shaft, sliding shaft) and door body wheel. The door body is a metal structure, and is divided into stainless steel door body, aluminum alloy door body and die-casting aluminum door body according to the material.

2.机头

2. head

机头由驱动器和电气部分组成，它固定在门体的一端，带动门体伸缩运动，与门体配套使用。驱动器分普通型和机器人型。

The head is composed of a driver and an electrical part, which is fixed at one end of the door body to drive the door body to expand and move, and is matched with the door body. The drive is divided into common type and robot type.

3.控制器

3. controller

控制器由控制盒、台式控制器及手柄遥控器组成。

The controller is composed of a control box, a desktop controller and a handle remote controller.

3.1 控制盒

3.1 control box

控制盒固定在机头内，由它接收控制器发出的指令控制门体的运行。

The control box is fixed inside the head, and it receives the instructions issued by the controller to control the operation of the door body.

3.2 台式控制器

3.2 desktop controller

台式控制器主要由值班人员在值班室内使用。

The desktop controller is mainly used by duty personnel in duty rooms.

3.3 手柄遥控器

3.3 handle remote control

手柄遥控器主要配备车辆使用，可在机头周围10-30米内(根据现场的无线电通讯环境而定)活动控制大门的开、关。

The handle remote controller is mainly equipped with vehicles. It can control the opening and closing of the doors within 10-30 meters around the nose (according to the radio communication environment of the site).